RX-400 HF/VHF/UHF DSP Receiver

TEN-TEC has expanded its line of DSP based receivers. Tuning from 2 MHz to 3 GHz, the 1 ms synthesizer lock time provides realistic scan rates of 100 channels/sec or faster. One outstanding benefit of the DSP architecture is more than 50 built-in filter bandwidths from 100 Hz to 300 kHz, most useable in any detection mode. Strong signal handling is assured with a typical in-band 3rd order intercept of -3 dBm. In addition to conventional AGC presets, RX-400 includes a programmable mode. This allows the customer to build their own unique AGC characteristics specifically for a mission. A 21.4 MHz wideband IF output is provided with 6 MHz of bandwidth. The RX-400 includes both an RS-232 interface and TCP/IP. Receiver is modestly sized for ½ rack installation. Options will include: a Digital Data output, Narrowband IF output and a POTS interface to allow customer to remote unit anywhere with access to nothing but a phone line (no PC required).

RX-331 HF DSP Receiver

The TEN-TEC RX-331 is a multi-mode HF receiver operating from 5 kHz to 30 MHz, fully synthesized and utilizing state-of-the-art Digital Signal Processing. DSP technology brings the performance and repeatability of expensive military grade communications receivers into the more economic range of commercial receivers.

RX-340 HF DSP Receiver

The Ten-Tec RX-340 is a multi-mode, general coverage synthesized receiver utilizing extensive Digital Signal Processing. DSP brings the performance and repeatability of expensive military grade communications receivers into the price range of top end commercial receivers for shortwave listeners. Tunable from 5 kHz to 30 MHz, it provides tuning steps and display resolution of 1 Hz. All three displays are blue/green vacuum fluorescent and provide unparalleled contrast and readability. The RX-340 is a laboratory-quality instrument in its ability to quantify the amplitude and frequency characteristics of signals and receivers.

RX-320D HF Receiver

Now USB READY! The TEN-TEC RX-320D PC-controlled shortwave receiver allows quality SWLing for a fraction of the price of other shortwave receivers. Load the 1 MB of software from the included CD-ROM to your hard drive, connect the RX-320D to an open serial port, plug the radio into the wall and you’re ready to explore the world. No serial port? Use the provided serial port-to-USB adapter to plug RX-320D into an open USB port on your PC.