The first truly low loss 8X-type coax, with foil plus tinned copper shield, micro-cell foam dielectric, and now with a great new, tougher, higher temperature, UV resistant jacket. Originally introduced in 1990, there is still nothing better in its class.
The first truly low loss 8X-type coax, with foil plus tinned copper shield, micro-cell foam dielectric, and now with a great new, tougher, higher temperature, UV resistant jacket. Originally introduced in 1990, there is still nothing better in its class.
Introduced in 1988, the first flexible, rotor-safe, NCV jacket version of the air-dielectric type low-loss coax. A true superstar and still the workhorse of the flexible low-loss RG8-type on the market. Nothing else is comparable to this “original.”
The first truly low loss 8X-type coax, with foil plus tinned copper shield, micro-cell foam dielectric, and now with a great new, tougher, higher temperature, UV resistant jacket. Originally introduced in 1990, there is still nothing better in its class.
The first truly low loss 8X-type coax, with foil plus tinned copper shield, micro-cell foam dielectric, and now with a great new, tougher, higher temperature, UV resistant jacket. Originally introduced in 1990, there is still nothing better in its class.
Introduced in 1988, the first flexible, rotor-safe, NCV jacket version of the air-dielectric type low-loss coax. A true superstar and still the workhorse of the flexible low-loss RG8-type on the market. Nothing else is comparable to this “original.”
The first truly low loss 8X-type coax, with foil plus tinned copper shield, micro-cell foam dielectric, and now with a great new, tougher, higher temperature, UV resistant jacket. Originally introduced in 1990, there is still nothing better in its class.
The first truly low loss 8X-type coax, with foil plus tinned copper shield, micro-cell foam dielectric, and now with a great new, tougher, higher temperature, UV resistant jacket. Originally introduced in 1990, there is still nothing better in its class.
Introduced in 1988, the first flexible, rotor-safe, NCV jacket version of the air-dielectric type low-loss coax. A true superstar and still the workhorse of the flexible low-loss RG8-type on the market. Nothing else is comparable to this “original.”
Used with RG8X coax to install PL259 connector
Used with RG8X coax to install PL259 connector
For use with RG8, RG213 and Rg8X, RG58 (with, optional, correct reducer)
Bands: 2m/70cm
Gain dBi: 3.0/5.5
Watts: 200
Height: 40.2”
Mount: UHF
Finish: Chrome
Special Features:
• Factory pre-tuned, no adjustment
• Highest gain
• Wideband performance
• 24Kt gold plated connector pin
2 Meter/440 Mhz Glass Mount Antenna
The X50NA and X50A are excellent choices where ruggedness is required in a medium-gain, dual-band application.
The D130J Super Discone Antenna is an ultra-wideband antenna covering amateur radio, commercial 2-way, cellular, air traffic control and various utility frequency bands. Rust-free stainless steel is employed in major component parts making the antenna rust resistant and durable.
GP15 Specifications
Frequency: 6M/2M/440
Gain: 3.5/6.2/8.6 dB
.
High gain VHF/UHF base station antennas.
Antenna Height: 19 inches
Base magnet size: 2.625 inches
Coax: 10 feet, RG58
RF connector on cable: BNC
Antenna Height: 19 inches
Base magnet size: 2.625 inches
Coax: 10 feet, RG58
RF connector on cable: PL259
GP-6
DualBand 146/446MHz
Gain & Wave:
146MHz 6.5dBi 5⁄8 wave x 2
446MHz 9.0dBi 5⁄8 wave x 5
DualBand 146/446MHz
Gain:
146MHz 4.5dBi
446MHz 7.2dBi
This is the most popular antenna in the Comet line for several reasons: Mid-size – mid-price range – open coil bends to absorb brushes with tree branches – black color fades into the skyline – ground independent
Special Features:
The SBB-25 is the best 2M mobile antenna COMET has to offer. The radiation pattern provides the best possible signal strength and coverage area.
Mono Band 146MHz
Base/Repeater Antenna
Gain & Wave: 6.5dBi 5/8 wave x 2
Short 85 foot long dual band 80/40 Meter dipole antenna is full-size on 40 Meters and has ultra-efficient end-loading on 80 Meters. Handles 1500 Watts. Super-strong injection-molded center insulator with built-in SO-239 connector and hang hole. Solderless , crimped construction. 7-strand, #14 gauge hard copper antenna wire. Connect your coax feedline directly, no tuner needed.
160 meter through 10 meter operation
when an antenna tuner is used
102 feet, total length
RS-720/RS-720NMO
Med-duty, 3 adjustment planes, up to 60” antenna. The RS-720NMO has a 3/4” hole to accept an NMO mount.
CR-5M
Standard Cable Assembly
16 feet 9 inches of RG-58/U coax with UHF
(PL-259/SO-239) connectors
The MFJ-260C is an air cooled, non-inductive resistor in a perforated metal housing. It has SO-239 connectors. You can handle a full load for 30 seconds. Silk-screened derating curve to 5 minutes. Handles 300 Watts. SWR below 1.1:1 to 30 MHz, 1.5:1 from 30 to 650Mhz. It measures a super compact 2 1/4×2 1/4×7 inches.
Specifications
IMPEDANCE: 50 Ohms, ± 10 %
VSWR: Max: 1.3:1, 0-650 MHz
POWER: 300 Watts for 30 seconds
DISSIPATION: (2 min cooldown) 25 Watts continuous
DIMENSIONS: 2½” x 2½” x 7”
2.5 inches X 1 inch
2.5 inches X 1 inch
HF-1500 Watts
VHF/UHF-500 Watts
VSWR: 1.2 to 1
SO-239 connectors
Double braided polyester
UV resistant
Double braided polyester
UV resistant
Double braided polyester
UV resistant
Double braided polyester
UV resistant
Center Insulator Assembly
Provides secure connection points for antenna wire
and RG8X, RG58 coax or ladder line
Center Insulator Assembly
Provides secure connection points for antenna wire
and RG8X coax or ladder line
MFJ-259B gives you a complete pictures of your antennas performance. You can read antenna SWR and Complex Impedance 1.8 to 170MHz. Read Complex Impedance as series resistance and reactance (R+jX) or as magnitude (Z) and phase (degrees).
Converts a USB port into a 9-pin male RS-232 serial port. The USB Serial Adapter is designed to make serial port expansion quick and simple. Works with all Ten-Tec products with a RS-232 serial port.
The model 712 adapter cable (6ft in length) is a soundcard USB device that allows direct connection of the AUX I/O, ACC 1, or AUX 1 jacks on the Omni VII, Orion/Orion II, Argonaut V and some Jupiter HF transceivers to an open USB port for digital mode use.
UHF female to SMA male adapter
Barrel Connector
The model 1213 kit allows the rear panel AUX I/O jack on the Orion and Orion II transceivers, the rear panel ACC 1 jack on the Omni VII and Jupiter transceivers, or the front panel ACCESSORY jack on the Pegasus to be directly connected to a typical PC sound card for digital mode operation.
Extra accessory cables for model 715 and Kenwood or Icom rigs. 715K = 1/4” stereo output connector to 8 pin Kenwood mic connector as used on Kenwood and Elecraft transceivers. Do not add this cable when ordering model 715 unless you need a second output cable, as one is supplied at no charge with 715 purchase.
Extra accessory cables for model 715 and Icom rigs. 715I = 1/4” stereo output connector to 8 pin Icom mic connector as used on Icom transceivers. Do not add this cable when ordering model 715 unless you need a second output cable, as one is supplied at no charge with 715 purchase.
Extra accessory cables for model 715 and Ten-Tec or Yaesu rigs. 715T8 = 1/4” stereo output connector to 8 pin Ten-Tec mic connector as used on Omni-VII and Orion II and all 8 pin Yaesu transceivers. Do not add this cable when ordering model 715 unless you need a second output cable, as one is supplied at no charge with 715 purchase.
Extra accessory cables for model 715 and Ten-Tec or Yaesu rigs. 715T4 = 1/4” stereo output connector to 4 pin Ten-Tec mic connector as used on Jupiter, Omni-VI, Paragon, etc. Do not add this cable when ordering model 715 unless you need a second output cable, as one is supplied at no charge with 715 purchase.
Extra accessory cables for 707 Regal desk microphone and Ten-Tec or Yaesu rigs. 707T8 = 4 pin XLR to 8 pin Ten-Tec mic connector as used on Omni-VII and Orion II and all 8 pin Yaesu transceivers. Do not add cables when ordering model 707 unless you need a second output cable, as one is supplied at no charge with 707 purchase.
Extra accessory cables for 707 Regal desk microphone and Ten-Tec or Yaesu rigs. 707T4 = 4 pin XLR to 4 pin Ten-Tec mic connector as used on original Orion, Jupiter, Omni-VI, Paragon, etc. Do not add cables when ordering model 707 unless you need a second output cable, as one is supplied at no charge with 707 purchase.
8 pin to Yaesu RJ45 adapter; RJ45 Yaesu rigs need BOTH 707T8 and R3415.
Extra accessory cables for 707 Regal desk microphone and Kenwood 8 pin rigs. Do not add cables when ordering model 707 unless you need a second output cable, as one is supplied at no charge with 707 purchase.
Extra accessory cables for 707 Regal desk microphone and Icom 8 pin rigs. Do not add cables when ordering model 707 unless you need a second output cable, as one is supplied at no charge with 707 purchase.
8-Pin Accessory cable for use with Orion II, Omni VII, and Yaesu radios
4-Pin Accessory cable for use with Jupiter and Orion
8-Pin Accessory cable for use with Kenwood radios
8-Pin Accessory cable for use with Icom radios
UHF Female to BNC male adapter
8-pin male to 4-pin female Ten-Tec adapter. This adapter is used for plugging in a microphone equipped with a 8 pin Ten-Tec connector into a Ten-Tec 4 pin equipped transceiver or accessory device.
Note that the INPUT jacks on the 715 are wired 8 pin Ten-Tec/Yaesu and 1/8” mono and are not wired for direct input of 8 pin Kenwood microphones. Adapters for the input of the 715 for use with Kenwood microphones are now available. Also order model 721 under Cables / Adapters if needed. Use 721 adapter for Elecraft Transceivers excluding Elecraft hand mic.
Note that the INPUT jacks on the 715 are wired 8 pin Ten-Tec/Yaesu and 1/8” mono and are not wired for direct input of 8 pin Icom microphones. An adapter, model 720, is available for direct connection of Icom microphones to model 715
5 pin DIN to RCA phono plug adapter cable. Used for interfacing the ACC DIN connector for PTT, audio in and audio out on the rear panel of the Omni-VII, Orion, Orion II, Jupiter and Argonaut V. Makes connecting accessory devices like a PC sound card to the rig easier than soldering your own DIN connector.
4-pin male to 8-pin female Ten-Tec adapter. This adapter is used for plugging in a microphone equipped with a 4 pin Ten-Tec connector into a Ten-Tec 8 pin equipped transceiver or accessory device.
4 pin power cable as used for Omni-V, Omni-VI, Omni-VI Plus, Paragon, Paragon II, Corsair, Corsair II, Argosy, Argosy II, all original Omni series and most Triton IV transceivers. 5 feet length, 14 AWG wire with 4 pin AMP Mate-N-Lok connector on one end of the cable.
2 pin power cable as used for Orion, Orion II, Jupiter, Pegasus, Omni-VII, Delta II, Argonaut II, Argonaut V, Scout transceivers. 5 feet length, 14 AWG stranded copper with 2 pin AMP Mate-N-Lok connector on one end.
The Daiwa CN-101L is a cross-needle SWR/Wattmeter covering 1.8 to 150 MHz. The cross-needle movement allows the simultaneous monitoring of forward power, reflected power, and SWR, all without the need of an extra calibration proceedure. The meter is switchable for 15, 150 or 1500 watt full scale readings, and has a built-in lamp which can be powered from an external 13.8 vDC source. Supplied with a DC power cord, which is only required for powering the built-in lamp.
The SX600 measures forward and reflected power and VSWR. Compact size makes meter useful for testing both base and mobile installations. Two directional couplers with switch and LED indicators for in-line connection of two transceivers.
The SX40C is a compact SWR-power meter. Featuring cross needle design for measuring SWR and output power simultaneously. Compact size makes it very useful for testing mobiles as well as base station installation.
RF Speech Processor is a high performance true RF-type speech processor designed to operate with most modern HF Amateur Radio transceivers. Order 715-T4 for model 715 supplied with output cable for 4 pin Ten-Tec rigs like Jupiter, Omni-VI, Paragon. Order 715-T8 for model 715 supplied with output cable for 8 pin Ten-Tec rigs, Orion II and Omni-VII. The 715-T8 is also “plug and play” for 8 pin Yaesu transceivers.
There are accessories available for the RF Speech Processor - Ten-Tec 8PIN. Please click on the picture to the left or the product title above.
RF Speech Processor is a high performance true RF-type speech processor designed to operate with most modern HF Amateur Radio transceivers. Order 715-T4 for model 715 supplied with output cable for 4 pin Ten-Tec rigs like Jupiter, Omni-VI, Paragon. Order 715-T8 for model 715 supplied with output cable for 8 pin Ten-Tec rigs, Orion II and Omni-VII. The 715-T8 is also “plug and play” for 8 pin Yaesu transceivers.
There are accessories available for the RF Speech Processor - Ten-Tec 4PIN. Please click on the picture to the left or the product title above.
RF Speech Processor is a high performance true RF-type speech processor designed to operate with most modern HF Amateur Radio transceivers. Order 715-K for model 715 with output cable for 8 pin Kenwood and Elecraft transceivers. Note that the INPUT jacks on the 715 are wired 8 pin Ten-Tec/Yaesu and 1/8” mono and are not wired for direct input of 8 pin Kenwood microphones. Adapters for the input of the 715 for use with Kenwood microphones are now available. Also order model 721 under Cables / Adapters if needed. Use 721 adapter for Elecraft Transceivers excluding Elecraft hand mic.
There are accessories available for the RF Speech Processor - Kenwood 8PIN. Please click on the picture to the left or the product title above.
RF Speech Processor is a high performance true RF-type speech processor designed to operate with most modern HF Amateur Radio transceivers. Order 715-I for 8 pin Icom transceivers. Note that the INPUT jacks on the 715 are wired 8 pin Ten-Tec/Yaesu and 1/8” mono and are not wired for direct input of 8 pin Icom microphones. An adapter, model 720, is available for direct connection of Icom microphones to model 715. Also order model 720 under Cables / Adapters if needed.
There are accessories available for the RF Speech Processor - Icom 8PIN. Please click on the picture to the left or the product title above.
The 302R remote/encoder keypad allows armchair operation of the JUPITER, RX-350D, OMNI-VII, ORION, or ORION II. Black color is cosmetic match for current Ten-Tec HF transceivers. Direct frequency entry from keypad and control of some transceiver functions from three function buttons located above the tuning knob.
PTT foot switch
PS2 keyboard for CW transmit use on Jupiter transceiver
Mini PTT switch
Model 310 cooling fan assembly is an external accessory cooling fan for HF transceivers. Hole-free attachment to transceiver rear heat sink via 4 allen screws.
The 610 is designed to enhance Omni VII remote transceiver operation by allowing your existing CW paddle, microphone and/or headset to be used with the transceiver when in remote mode.
INRAD #760 250 Hz bandwidth 9 MHz I-F CW filter. Used as a roofing filter in the original Orion 565 transceiver. Also used as NAR position bandwidth filter for the Omni-V, Omni-VI, Omni-VI Plus.
1.8 kHz bandwidth 9 MHz I-F SSB filter. Used as a roofing filter in the original Orion 565 transceiver. Also used as NAR position bandwidth filter for the Omni-V, Omni-VI, Omni-VI Plus.
Drop in replacement model for #217 and #2017 as used in the 9 MHz I-F for the original Orion, NAR filters in Omni-V and Omni-VI series and early Omni’s. International Radio filter #759, 9 MHz I-F, 400 Hz bandwidth.
400 Hz CW filter, 6.3 MHz I-F for the Omni-V, Omni-VI, Omni-VI Plus, Paragon, Paragon II transceivers. Drop-in replacement for model 285 originally specified for these transceivers. This filter is manufactured by International Radio, part #750.
250 Hz CW filter, 6.3 MHz I-F for the Omni-V, Omni-VI, Omni-VI Plus, Paragon, Paragon II transceivers. Drop-in replacement for model 285 originally specified for these transceivers. This filter is manufactured by International Radio, part #751.
2.1 kHz filter, 6.3 MHz I-F for the Omni-V, Omni-VI, Omni-VI Plus, Paragon, Paragon II transceivers. Drop-in replacement for model 288 1.8 kHz filter originally specified for these transceivers. This filter is manufactured by International Radio, part #758.
For Omni-VII (588 and 588AT)
For Omni-VII (588 and 588AT)
Model 940 speaker console with internal switching power supply provides up to 25 amps current at 13.8 Vdc for powering HF transceivers and other Amateur Radio devices from an input of 115/230 VAC, 50/60 Hz. Internal high-quality 4 ohm 5 watt speaker is suitable for every possible communication need, from clean CW to well rounded AM receive audio.
115/230 VAC input, 25 amps continuous duty at 13.8 VDC output. Size: HWD 2“x7“x9.5”. 13.8 volt connections on rear. Red & Black Heavy duty binding posts. Weight, 4 pounds.
12 volt, linear, regulated
1 amp
Model 940 speaker console with internal switching power supply provides up to 25 amps current at 13.8 Vdc for powering HF transceivers and other Amateur Radio devices from an input of 115/230 VAC, 50/60 Hz. Internal high-quality 4 ohm 5 watt speaker is suitable for every possible communication need, from clean CW to well rounded AM receive audio.
The model 307B external communications speaker is designed for use with Ten-Tec radio receivers and transceivers. The 307B is a black cabinet as used for the Orion, Orion II, and Argonaut V HF transceivers, Omni-VII and the RX-350D receiver. The cabinet and speaker are suitable for every possible communcation need, from clean CW operation to well-rounded AM receive audio. The speaker response is 100 to 18000 Hz, 4 ohms impedance, 5 watts power. Speaker measures 4 inches diameter. Supplied with connection cable.
Model 708A deluxe base microphone. TEN-TEC model 708A is an omni-directional dynamic microphones designed for use as a communications station microphone for Amateur Radio and other transmitting applications. The unit consists of a metal die-cast base (plastic bottom cover) with 3 position PTT switch with momentary TX, OFF, and LOCK positions, flexible metal gooseneck, dynamic microphone element and ball-type element housing. The element has tailored frequency response from 30 Hz to 12 kHz designed for excellent transmit audio in SSB, AM, and FM modes.
Order a 710A 8-Pin Male to 4-Pin Female Ten-Tec Adaptor under Cables/Adapters for use with Jupiter Transceiver.
There are accessories available for the Deluxe desk microphone - Ten-Tec 8-Pin. Please click on the picture to the left or the product title above.
The TEN-TEC Model 767 DX PRO Headset Mic combines armchair comfort with superb audio to provide exceptional performance. The 767’s clean, light-weight design has an easy-to-adjust fit and can be worn for long periods without fatigue. Great for DXing, contesting, or everyday use! It has a unidirectional dynamic mic that isolates out ambient noise for excellent SSB audio, and has an adjustable boom with windscreen for outdoor use. TEN-TEC even offers adapter cables for most SSB transceivers. This great sounding headset has an extra length coiled cord with a 1/4” plug.
Accessory cable is required please see below
There are accessories available for the DX Pro Headset - Mono. Please click on the picture to the left or the product title above.
The TEN-TEC Model 777 DX PRO Headset Mic combines armchair comfort with superb audio to provide exceptional performance. The 777’s clean, light-weight design has an easy-to-adjust fit and can be worn for long periods without fatigue. Great for DXing, contesting, or everyday use! It has a unidirectional dynamic mic that isolates out ambient noise for excellent SSB audio, and has an adjustable boom with windscreen for outdoor use. TEN-TEC even offers adapter cables for most SSB transceivers. This great sounding stereo headset can also be used for panoramic cw and has an extra length coiled cord with a 1/4” plug.
Accessory cable is required please see below
There are accessories available for the DX Pro Headset - Stereo. Please click on the picture to the left or the product title above.
Omni-directional, dynamic element, 500 ohm impedance, wired with a 4 pin connector for the Jupiter and older Ten-Tec HF transceivers. Coiled connection cable.
Omni-directional, dynamic element, 500 ohm impedance, wired with an 8 pin connector for the Omni-VII and Orion II HF transceivers. Coiled connection cable. Also usable with 8 pin equipped Yaesu transceivers.
The best sounding microphone Ten-Tec has offered yet for Amateur Radio, and possibly the best sounding one available from anyone today! MIC stand is not included please order Model 716 – Regal Table Stand. Available also is a custom hand built solid walnut microphone stand with your callsign laser etched on the front.
There are accessories available for the Regal desk microphone - Icom 8PIN. Please click on the picture to the left or the product title above.
The best sounding microphone Ten-Tec has offered yet for Amateur Radio, and possibly the best sounding one available from anyone today! MIC stand is not included please order Model 716 – Regal Table Stand. Available also is a custom hand built solid walnut microphone stand with your callsign laser etched on the front.
There are accessories available for the Regal desk microphone - Kenwood 8PIN. Please click on the picture to the left or the product title above.
The best sounding microphone Ten-Tec has offered yet for Amateur Radio, and possibly the best sounding one available from anyone today! MIC stand is not included please order Model 716 – Regal Table Stand. Available also is a custom hand built solid walnut microphone stand with your callsign laser etched on the front.
There are accessories available for the Regal desk microphone - Ten-Tec 4PIN. Please click on the picture to the left or the product title above.
The best sounding microphone Ten-Tec has offered yet for Amateur Radio, and possibly the best sounding one available from anyone today! MIC stand is not included please order Model 716 – Regal Table Stand. Available also is a custom hand built solid walnut microphone stand with your callsign laser etched on the front.
There are accessories available for the Regal desk microphone - Ten-Tec 8PIN. Please click on the picture to the left or the product title above.
Model 709A is an omni-directional dynamic microphones designed for use as a communications station microphone for Amateur Radio and other transmitting applications. The unit consists of a die-cast zinc shell with molded sliding PTT on/off switch, dynamic microphone element and detachable multi-wire connection cable. The element has tailored frequency response from 30 Hz to 12 kHz designed for excellent transmit audio in SSB, AM, and FM modes.
Order a 710A 8-Pin Male to 4-Pin Female Ten-Tec Adaptor under Cables/Adapters for use with Jupiter Transceiver.
Die-cast metal table stand for the Regal desk microphone. Threaded 6” tube for easy installation of the microphone.
There are accessories available for the Table stand for Regal desk microphone. Please click on the picture to the left or the product title above.
Custom, hand built, microphone base-Personalized with “your call” Laser etched into base front.
Hear the difference a quality external speaker will make to your short wave listening experience. Designed to match the unique RX-340 enclosure, you will love the sound of this new shielded driver. Solid 3/4 inch red oak sealed box is finished with a hand rubbed urethane satin finish.
Specifications: Power Handling: 40 watts RMS/70 watts max Impedance: 4 ohms Frequency Response: 100-10,000 Hz Dimensions: 8 3/8 H x 8 1/2 W x 11 1/4 D Terminals: Gold plate binding post. Can also be used with dual banana plugs
There are accessories available for the RX-340 Oak Speaker. Please click on the picture to the left or the product title above.
Enjoy the rich warm beauty of our new solid oak cabinet designed exclusively to match the RX-340 receiver. Built from 3/4 inch red oak and finished with a hand rubbed urethane satin finish to sustain the beauty and patina of this hand crafted cabinet for years to come.
There are accessories available for the RX-340 Oak Rack Cabinet. Please click on the picture to the left or the product title above.
Model RM-588 19” rack mounting hardware for the 588 Omni-VII transceiver. Used for mounting Omni-VII into a 3U opening standard 19” rack. Mounts to the sides of the transceiver case. All necessary hardware included.
Oak wood cabinet for the model 1054, which includes a grilled speaker inside the top of the case. Very nice construction on the oak cabinet gives the 1054 a more finished appearance than using it without a case or with an aluminum enclosure.
ARRL’s Wire Antenna Classics
A collection of the best articles from ARRL publications
QST articles about the lure of vintage Amateur Radio gear
Equipment
Techniques
Personal Experiences
Restoration
Classic Ads
and more…
TEN-TEC The First 40 Years. Author N.L. Williams, NR4RR, takes you through the first 40 years of the history of TEN-TEC. From the founding of the company in 1968 to the 2008 release of the Omni-VII, Williams’ book is a 132 page illustrated description of all that happened behind the scenes to make TEN-TEC what they are today.
ARRL’s Tech Q&A 5th Edition
Your Quick & Easy Path to your FIRST Ham Radio License
NEW 5th Edition! For exams given on or after July 1, 2010.
The ARRL Ham Radio License Manual
All you need to become an Amateur Radio Operator
Valid for exams given through June 30, 2010.
Turn dreams of constructing your first amp or next brick into reality!
The ARRL Repeater Directory 2010-2011 (Desktop Edition)
2010/2011 Edition
Locate Repeaters On-the-Go!
Handy indexing tabs on the cover
Easy-to-read listings
Key to ““Repeater Notes”“ located right up front
Icons to identify ““Open”“ or limited access repeater systems.
ALWAYS UPDATED with the latest listings each year!
The Global Positioning System (GPS) is a satellite-based, radio navigation system. GPS devices have become commonplace in consumer electronics. GPS units and GPS technology is used in our cars, on our boats, in ccell phones, in our personal computers and PDAs. GPS has improved the way we navigate, communicate, and move about the planet.
ARRL’s General Q&A
Upgrade to a General Class Ham Radio License NOW! It’s Quick and Easy with this study guide and the convenient question and answer format.
NEWS FLASH! FCC Drops Morse Testing for All Amateur License Classes
The ARRL General Class License Manual
“The ARRL General Class License Manual is FANTASTIC. Passed my exam with 34 correct answers!” Ed Lapinski, K1MAE, Brooklyn, NY
NEWS FLASH! FCC Drops Morse Testing for All Amateur License Classes
ARRL’s Extra Q&A
Upgrade to an Extra Class Ham Radio License NOW! It’s Quick and Easy with this study guide and the convenient question and answer format.
Extra Class is the highest of all three Amateur Radio licenses!
The ARRL Extra Class License Manual
9th Edition
All You Need To Pass Your Extra Class Exam!
Pass the 50-question Extra Class test.
All the Exam Questions with Answer Key, for use July 1, 2008 to June 30, 2012.
Detailed explanations for all questions, including FCC rules.
A Great Book for learning about basic radio
ARRL’s Low Power Communication
The Art and Science of QRP
3rd Edition. By Richard Arland, K7SZ
Welcome to the world of QRP! Now you can explore the excitement of low-power radio operating with this third edition of ARRL’s Low Power Communication:
“Corsair Grey” with embroidered Ten-Tec logo with red dot. 60% pre-shrunk cotton, 40% polyester. The same shirt the Ten-Tec crew wears to hamfests nationwide.
“Corsair Grey” with embroidered Ten-Tec logo with red dot. 60% pre-shrunk cotton, 40% polyester. The same shirt the Ten-Tec crew wears to hamfests nationwide.
“Corsair Grey” with embroidered Ten-Tec logo with red dot. 60% pre-shrunk cotton, 40% polyester. The same shirt the Ten-Tec crew wears to hamfests nationwide.
“Corsair Grey” with embroidered Ten-Tec logo with red dot. 60% pre-shrunk cotton, 40% polyester. The same shirt the Ten-Tec crew wears to hamfests nationwide.
Ten-Tec baseball cap, light grey, embroidered two color black and red TT logo, MADE IN USA
The internal automatic antenna tuner can be added to any Orion or Orion II that does not have the autotuner already installed as a user-installable kit. The kit includes a completed circuit board, all necessary cables, and illustrated instructions. The AT566K is a no soldering required installation.
The internal automatic antenna tuner can be added to any Omni-VII that does not have the autotuner already installed as a user-installable kit. The kit includes a completed circuit board, all necessary cables, and illustrated instructions. The AT588K is a no soldering required installation
The model 1213 kit allows the rear panel AUX I/O jack on the Orion and Orion II transceivers, the rear panel ACC 1 jack on the Omni VII and Jupiter transceivers, or the front panel ACCESSORY jack on the Pegasus to be directly connected to a typical PC sound card for digital mode operation.
Includes:
If your are ordering the Jupiter Blue Display Upgrade Kit you DO NOT need to order this kit, as it is already included with the Jupiter Blue Display Upgrade Kit.
Includes:
Blue/grey screens and/or new firmware chip can be installed in any JUPITER transceiver.
The internal automatic antenna tuner can be added to any Jupiter that does not have the autotuner already installed as a user-installable kit. The kit includes a completed circuit board, all necessary cables, and illustrated instructions.
Small pointed tip-Perfect for kit soldering
The MFJ-260C is an air cooled, non-inductive resistor in a perforated metal housing. It has SO-239 connectors. You can handle a full load for 30 seconds. Silk-screened derating curve to 5 minutes. Handles 300 Watts. SWR below 1.1:1 to 30 MHz, 1.5:1 from 30 to 650Mhz. It measures a super compact 2 1/4×2 1/4×7 inches.
Specifications
IMPEDANCE: 50 Ohms, ± 10 %
VSWR: Max: 1.3:1, 0-650 MHz
POWER: 300 Watts for 30 seconds
DISSIPATION: (2 min cooldown) 25 Watts continuous
DIMENSIONS: 2½” x 2½” x 7”
HF-1500 Watts
VHF/UHF-500 Watts
VSWR: 1.2 to 1
SO-239 connectors